通用banner
Your current location : home >> News >> Company news

Pay special attention to the following points during the use of disposable oxygen inhalation tube

2020-11-20 09:50:18
second

Pay special attention to the following points during the use of disposable oxygen inhalation tube

Disposable oxygen inhalation tube is a medical product used for wound treatment and plays a good role in protecting the wound. At the same time, the disposable oxygen suction tube has higher requirements for material and is more convenient to use. At the same time, the following problems should be paid attention to during the production of disposable oxygen inhalation tube:

"Alkali boiling" of gauze is a very important section in the manufacturing process of disposable oxygen suction tube. The purpose is to remove the slurry, grease and wax in the grey cloth, which directly affects the quality of medical gauze. At the same time, there are many pollutants in this section, which needs special attention in work.


一次性吸氧管

Disposable oxygen inhalation tube

In order to reduce the amount of pollutants produced during the production of disposable oxygen suction tubes, the damaged gauze produced now is often completed through a series of processes such as steam steaming, water washing and bleaching after degreasing, dewaxing and slurry removal in a high-temperature cylinder. The pollutants from the previous process are often brought to the later stage, so as to ensure that the gauze meets the required hygienic standards and ensure product quality, More clean water must be used for cleaning.

In addition, the disposable oxygen tube must be strictly tested and inspected before leaving the factory. It has soft hand feeling, strong water absorption, uniform weft density, white and tasteless, no acid and alkali, and is safe to use. The sparse pure cotton gauze grey cloth is selected. After selecting the qualified and applicable gauze, it is subject to chlorine oxygen double bleaching (degreasing), and then the degreased gauze grey cloth is mechanically divided into strips, and then cut into corresponding disposable oxygen tubes according to the required specifications.



label