A detail that must be paid attention to in the production of disposable oxygen suction tube block
Disposable oxygen inhalation tube block is a medical product used for wound treatment and plays a good role in protecting the wound. At the same time, the medical gauze block has higher requirements for material and is more convenient to use. At the same time, the following problems should be paid attention to during the production of medical gauze block:
In the production process of disposable oxygen suction tube block, the "alkali boiling" of gauze is a very important section to remove the slurry, grease and wax in the grey cloth, which directly affects the quality of medical gauze. At the same time, there are many pollutants in this section, which needs special attention in the work.
In order to reduce the amount of pollutants produced during the production of disposable oxygen suction tube block, the damaged gauze produced now is often completed through a series of processes such as steam steaming, water washing and bleaching after degreasing, dewaxing and sizing in a high-temperature cylinder. The pollutants from the previous process are often brought to the next section to ensure that the gauze meets the required hygienic standards and product quality, More clean water must be used for cleaning.
In addition, the disposable oxygen tube must be strictly tested and inspected before leaving the factory. It has soft hand feeling, strong water absorption, uniform weft density, white and tasteless, no acid and alkali, and is safe to use. The sparse pure cotton gauze grey cloth is selected. After selecting the qualified and applicable gauze, it is subject to chlorine oxygen double bleaching (degreasing), and then the degreased gauze grey cloth is mechanically divided into strips, and then cut into corresponding medical gauze blocks according to the required specifications.